New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: ianmcneil68 on August 13, 2017, 12:44:07 PM
-
Is it possible to run Vision with muti-denom? If so, what is the chip combination. I have one Vision machine that has all of the hardware for multi-denom, I just don't, or haven't attempted, to use it. I know GX0 and 248's will run any Vision and I run those in all of mine. I wouldn't mind running multi-denom though. Any info would be appreciated.
Thanks, Ian.
-
It's been awhile but as I recall GX0 is single demon, GX1 is multi. Also, depends on the game too, some support multi, some not. PAR sheet for the game would give a clue on that I would think.
-
SG380s support multi denom but require ATA10065 or newer. The PSR is available in the files section.
-
Just looked at the PSR for 248, not Multi denom compatible, must use 380.
-
I know GX1 and 380's are the norm for multi. I seem to recall trying to use 380's in that machine before and had trouble. I just wasn't sure if there was any other combo that would work for vision. The game is MSLGM 5 line.
-
Sorry, SB000421. Running ATA65 in the top box.
-
380s & 11GX1 should work. Might have to clear it & definitely have to key it to set up multi denom.
-
I'll give a shot.