New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: GOS on October 23, 2017, 08:40:34 AM
-
could not find my original post - had a dead battery issue - ended up Klar had to replace ICs that had battery attached. Once I got the cpu back - more issues arose - at this point i have a 54 error which I cannot clear.
This game does NOT HAVE A BV - all hardware removed. This game was working at one time with the current configuration of door switch
The door switch is a cherry E78 - and it tests okay
Wiring going to the switch 2 black wires from backplane J7 27 to pos 1 on cherry
1 orange/yellow backplane j7/31 to pos 3 on cherry
1 orange/black backplane j7/3 to pos 5 on cherry
the bv door - no switch present - the wire harnesses are there
confused as to what needs to be jumped to indicate bill door closed (54 error)
-
Ok I am not a big 5500 person , but are there dip switches on the mpu that must be set for no dbv? If it's like a bally 6000 ,you must set the switches to say no dbv and then do a complete clear. Hope this helps. Scott
-
very good answer - will check the bit swx tomorrow - have the manual.
-
sometimes the obvious is the way to go - YES - DIP Switch was the answer - somehow when board being repaired? who knows how or why - turned on swx3 pos 5 and 6 (NO BV) - did saferam clear - GAME came up - no more 54 - game played.