New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Aristocrat Video Gaming Machines => Topic started by: bogan on February 24, 2020, 10:08:20 PM
-
Hello all. I am trying to get an SPC2.5 working on an Aussie MK6. I have read the US manuals and I can see that serial port to use is P19 and P23. This maps to SOUT2 and SIN2, which is output on P15 on the Aussie back-plane when using the 410748 CCB. I know this port works, as I have been using it for a different protocol.
Currently the game is not seeing the SPC board, so clearly I have something wrong.
I guess the first question I have, is that the SPC2.5 board has LED for transmit and receive. On P2 (Gamma/EGM), the LED is flashing, and when I look at the data on an oscilloscope it looks like its sending 2-3 bytes repeated. Is this normal? Does the SPC transmit data on P2 even if not connected to the EGM?
When I look at the diagnostic page for the SPC, it does not show any data being received or sent.
I can use my logic analyser to verify the data that is being sent on P2 if needed.
Second question, do I need the SAS port connected and polling before the EGM will see the SPC2.5?
Thanks,
Bogan.
-
I can't say anything about your first question, but I can say about your second question that SPC2.5 communicates with the machine regardless of whether it is polled by SAS.
-
I can't say anything about your first question, but I can say about your second question that SPC2.5 communicates with the machine regardless of whether it is polled by SAS.
Legend. Thanks for thats.
-
The SPC2.5 around 300 commands to activate communication with the machine, I have been studying about the topic but I have not been able to find the complete protocol, what I know has been using a protocol analyzer, a pity that there is not much protocol information Gamma or Aristocrat serial protocol
-
The SPC2.5 around 300 commands to activate communication with the machine, I have been studying about the topic but I have not been able to find the complete protocol, what I know has been using a protocol analyzer, a pity that there is not much protocol information Gamma or Aristocrat serial protocol
I plan to put a protocol analyser on it as well. Perhaps we can share info?
I still have to figure out how to get the SPC working yet. I have been tied up with other stuff so have not had a chance to play with it for a few weeks.