New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: rickhunter on February 13, 2015, 01:03:30 PM
-
Does anybody have a picture or pinout of the cable that goes between the smart bezel and the WBA12/13 for a WMS Bluebird machine? I have the smart bezel, but I don't have the cable to connect it. I only have a cable to a UBA, which is a different connector type.
-
Hi All
I ve the same problem. Looking to fix need help.
Thanks
-
This this what you are looking for? This is the one I have in my WMS, but I have no extra one.
-
Hi Ron
I think so. Its really hard to find.
-
This this what you are looking for? This is the one I have in my WMS, but I have no extra one.
Does the cable coming out of the bezel get traced all the way to the black back connector?
-
This this what you are looking for? This is the one I have in my WMS, but I have no extra one.
Does the cable coming out of the bezel get traced all the way to the black back connector?
Yep!
-
Darn, that's going to make it more difficult.