**Video Poker, Keno, Slots, 21** Gaming machines > Odyssey Video Games |
Upgrade your Odyssey to a LCD, WBA with new $100, and new hard drive |
<< < (3/7) > >> |
Sunrise Side:
Take the cover off the control board and rotate the board 180*. You will have to cut some cable ties from the wires to get slack to rotate the board. Remount it and notch the cover to allow the video cable and the touchscreen cable exit the cover. |
Sunrise Side:
Then you can connect the other end of the 120 volt power cord to the original J1 P1 cable, Odyssey 120 volt Molex connector. Then Connect 2 wires from the touscreen control cord to the original Odyssey Molex connector. I will get the touchscreen wire colors and the Molex pin conections info tomorrow. Then connect the video cable to the Odyssey video card in its original connection. |
Sunrise Side:
I you used the original CRT framework / mount to mount the new 26" Ceronix to. I used 2" spacer between frame and the lip on the new Ceronix. |
VegasJ:
Wow!! You are awesome! Thank You! |
VegasJ:
What are the touchscreen controller cord colors you used on both ends? |
Navigation |
Message Index |
Next page |
Previous page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |