New Life Games LLC
Monitor Repair Log and Database. **Arcade and Gaming** => LCD and CRT Monitor Repair Tech Support => Topic started by: Stayouttadabunker on July 05, 2019, 10:54:30 AM
-
I got a new 3M touchscreen from Betson Enterprises for my 17" Game King Ceronix LCD [1495].
There's was a broken black wire on the 5-pin connector that goes from the NOVRAM interface board to the 5-pin touchscreen ribbon cable.
I forgot to mark down the wire colors on the black 5-pin Molex before I pulled them out to replace the pins with new ones. :banghead:
Now it's like trying to figure out what the 5 wire combination is.....ugh!!! :hissyfit:
Can anyone give me the wires colors for this Molex that plugs into the ribbon cable?
Thanks!
The 5-pin wire colors I tried are...>>>
Pin-1=Black
Pin-2=White
Pin-3=Brown
Pin-4=Red
Pin-5=Blue
When I go into the screen calibration, after about 4-5 touches on the "Dot", it acknowledges.
When I draw on the screen, everything is 90 degrees clockwise.
For example...If I touch at 12 o'clock - it draws at 3 o'clock sideways.
Link to video here...>>>
https://youtu.be/H8S5tzfqqdQ (https://youtu.be/H8S5tzfqqdQ)
-
Is this what you are talking about? This pic is door mount wells garner lcd touch screen to micro touch controller. May be different. I can take the back off a ceronix to look and see if it's the same?
-
Yes! Thank you!I will try that configuration!!
-
OK don't blame me if you see smoke!! :duh: :hissyfit:
-
:rotfl: :24: :Crazy: :Tongue_Out:
THAT wire color configuration worked!!! :yes: WHOO HOOOO!!!!!!
Thanks SIX!!! :cool_thumb_up:
This is the wire colors for this goddamn thing!
I will NEVER drop this bloody thing again!! hahaha
Turned out to be an EXPENSIVE mistake!
Pin-1=Blue
Pin-2=Black
Pin-3=Brown
Pin-4=White
Pin-5=Red
-
:cheers: