New Life Games LLC

Monitor Repair Log and Database. **Arcade and Gaming** => LCD and CRT Monitor Repair Tech Support => Topic started by: pinwiz55 on February 06, 2022, 11:36:02 PM

Title: IGT G20 monitor alignment problem, help needed
Post by: pinwiz55 on February 06, 2022, 11:36:02 PM

Does any one know how to permanently correct an alignment problem on the lower monitor of an IGT G20? When I boot up the machine the lower right side of the picture on the monitor bleeds right, see attached photo. I can correct it by holding in the auto adjust button on the back of the monitor, but I would like to permanently fix this so the picture is centered as its supposed to be when it boots up.

Thanks for any help,

John

Title: Re: IGT G20 monitor alignment problem, help needed
Post by: Firebird on February 07, 2022, 11:05:31 AM

A lot of the LCD's have a setting for the type of machine they are being used in, make sure yours is set to an AVP, might permanently fix your issue.

Title: Re: IGT G20 monitor alignment problem, help needed
Post by: tjlee on February 07, 2022, 12:46:25 PM

Check the caps on the AD board.  Bad capacitors are a common problem. with these monitors.