New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: morspeed on January 25, 2017, 04:46:11 PM

Title: BB2 Bill Validator Comm Error Need Help!!
Post by: morspeed on January 25, 2017, 04:46:11 PM

Had an mei in my machine and am changing to a uba 10. Installed the unit and tried jumpers on the backplane J1 2/3 J2 1/2 and J3 2/3 and also tried J1 2/3 J2 2/3 and J3 2/3 but can not get the unit to work. I connected it to the tool suite and it had id003 and I even flashed a newer version on the BV. The red light is on but unit does not cycle. It was tested working by a seller here on NLG.  My question is what does the harness look like and want to make sure I have the correct harness. The harness looked to be brand new and when I got it the harness was packaged.

Title: Re: BB2 Bill Validator Comm Error Need Help!!
Post by: Harp on January 25, 2017, 05:24:11 PM

Check your Jumpers on the UBA10 CPU, although it is ID003 (RS232) the UBA needs to be set for TTL (Netplex settings) for WMS games

Title: Re: BB2 Bill Validator Comm Error Need Help!!
Post by: morspeed on January 25, 2017, 05:58:06 PM

Yup. Figured it out. Needed to be in photo coupler isolation. Found a manual finally on how to do that.