New Life Games LLC
Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Pinball Games => Topic started by: trashman on March 30, 2014, 03:32:17 AM
-
hi when i put game in coil/flasher test flasher bulbs blow there 89 as should be.i havent done a voltage check yet but im guess there to many volts does anyone know how to fix this thanks :thank_you:
-
Is it just that one that blows? Any of the other flashers blow? Don't really know off the top of my head but is their supposed to be a diode on that one?
-
all of them in the backglass blow as differnt groups light, so i bought some 28 volt bulbs problem soveled for now.
-
Is it all the flasher in the back box or just one...putting a 28 volt bult (1251 I'm assuming) in a 89 socket will put some stress on the drive transistor for that circuit... I'd get the schematic and locate which flasher it is... and change the associated transistor for it..
I own a phantom .. I built it from parts and it runs like a new machine.
-
Replace your TIP122's and related diodes...Here is a lamp layout...
Jimmy
-
i may do that this winter.im not really playing my games much this time of year.i copyed the diagram.Thanks for everyones help