**Reel Slots** Gaming Machines > IGT Reel Touch Games |
Re: Denver Duck...Com Link Failure |
(1/2) > >> |
Jaycyn414:
What was needed to replace the hard drive? Was it as simple as just installing a new drive? Or did you have to back stuff up? I know this thread is a little old but running into same issue. Thank you |
qbert:
What is actually happening and displaying on the top box during start up? The question is has the harddrive already failed? If it has there is not much you can do other than get a preprogrammed replacement. Be weary of flea bay harddrives as the replacement harddrive must match your current top box bios, SB, SG, and VS chip set in the bottom MPU exactly. Backing up a Reel Touch harddrive must be done with a non-windows based program. You can use an old DOS based program to successfully "clone" a working harddrive. This operation becomes tricky especially with bios 1 type machines. Again warning do not attempt to review the files on the harddrive with a USB adapter connected to ANY windows based computer (this includes XP and earlier). The windows system adds files to the harddrive rendering it useless when returned to the machine. If you're interested in a replacement harddrive PM me I will need the following information top box bios type, bottom MPU type(500 series or 1270), SG, SB, and VS chip numbers. We can get your machine working again. Rich |
grand apprenti:
Voilà la machine |
qbert:
Nice when you turn the machine on the top screen starts with a red white and blue finger or the yellow and green energy star? Also need from the bottom cpu the SB, SG, and VS chips numbers. |
grand apprenti:
Bonjour en réponse de tes questions la machine commence avec un doigt rouge blanc et bleu concernant les numéros des puces voir les photos jointes cordialement patrick |
Navigation |
Message Index |
Next page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |