**Video Poker, Keno, Slots, 21** Gaming machines > IGT Fortune 1 Sircoma/Poker
Fortune Coin
kf2k3:
Good evening!
My first slot machine. A fortune 1 video reel. I know next to nothing about these things. Is this a model from 1975?
Monitor powers on, but the coin slot does not work. Is there a way to bypass this for the machine to spin? No buttons, just an arm. Also, the hopper is not running. Is there a way to test this out?
Chris-socal:
You are fortunate that the graphics and computer appear to be working. Unfortunately the expert on these machines passed away several years ago. Your machine should have a simple coin mechanism with a micro switch that you can flick with your finger to simulate a coin dropping.
These did not have a lock on the lever so you can usually pull the handle regardless of whether you have credits or not. That isn’t a problem.
Post a picture of the inside of the machine and one of the inside of the door. Let’s first verify that there is a coin mechanism in there at all.
The hopper will not run if you cannot get credits to play a spin…and win something.
Member Badbaud might have a few pointers based on your pics.
There is little or no technical information on these.
kf2k3:
Thanks for the reply! Attached are some pictures. When I flick the micro switch, it shows "4th coin accepted" on the monitor, but it goes away when I release it. The coin does fall into the hopper, though.
Chris-socal:
What happens when you pull the lever?
Can you bypass the switch and simulate the lever being pulled? Just want to make sure it’s not something as simple as a faulty switch.
I have one of these and I can’t get it to play either but my game graphics don’t work either.
kf2k3:
Nothing happens when I crank the arm.
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |