**Reel Slots** Gaming Machines > Aruze Reels Slots |
Communication #5 Error (NOK 1 PCB) |
(1/2) > >> |
markb7605:
Dose anyone how to fix this error. |
scottf11961:
What was the cause of this error? I have it now |
Slotman:
USB cable disconnected more than likely. There should be 4 cables plugged in. All USB ports should be populated. Sometimes unplugging and swapping ports helps. Also check the Batteries on the two boards behind the reels. |
scottf11961:
All the batteries in the machine are new. All USB ports (on the front that I can see) are taken. 4 total are plugged in. I haven't tracked the other ends yet. One looks like it goes into the door. When I tried swapping then around, a ton of other errors popped up. REEL MOTION mostly. Now I can't get rid of them. Is there a way to clear the machine and start over? |
scottf11961:
Have you solved the mystery? Ive had that communication error for a while now on my shinning 7s. To the point where ive given up. Behind the reels, there are 2 boards. On the right is a body board. On the left is the NOK board. Each board has its own USB cable. The error is coming from the left board. Thats as far as i got. Finding parts will not be fun |
Navigation |
Message Index |
Next page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |