New Life Games LLC
General NLG Chat => Before and After Restoration Pics => Topic started by: Ezequiel on October 08, 2018, 02:54:04 PM
-
I got this nice slot machine. It's like a bartop.
I want to restore it as best as possible, just turn on the light.
I was not able to find technical data.
Game: Litttle Chief
Brand: Azcoyen (Bally ??)
I'll upload the photos just have time
Problem detected:
1) 3.6 volt battery has exploded and its replacement was 3 batteries x 1.5 V.
2) Broken connector. I will change it
3) Reel not illuminate or project two simultaneous figures on the same reel
4) Broken door
5) Broken lock
6) Cleaning and painting
[size=78%]Regards[/size]
-
Yesterday I turned on the machine to test it.
Apparently there is some false contact, it does not turn on sometimes
There was a symbol (Bell) that was not activated.
A cut wire, solder it back in its position.
My attention was drawn to how the shapes were drawn on the screen and disarm a "display"
The figures are projected in a dark plastic. There is a slide and a lamp for each figure.
-
I'm trying to replace the glass lamps.
The 10 mm LEDs are perfect for this.
Edit: I will leave the lamps ...
-
Let's do it!
-
I was able to weld the broken door. I look great!
On Tuesday I will go through the electronics store to buy components.
Monday is a non-working holiday. I will take advantage of doing other things ...
-
Get 10 pin connector. Use two units to have 20 pins needed.
I can not leave that broken connector :no:
-
Small advance!
-
Almost ready....
-
A good cleaning to the motherboard and soldering the battery