Konami Gaming K2V - Qcom help

[Paulluap]

Hi
Hi
Got this machine in a non working condition. It is an Australia, New Zealand version.
Just brought a new main board as the old one was damaged by mice.

Machine starts up now but has the following lockups. see attached photos

There is a switch on the new board which lets me do some sort of ram reset. I can change most options, but not the gamble, this has to be done via comms?

I have read about these machines having to be connected to a Qcom Network. There is a cf ram reset card on ebay that the person said will work with my machine, but not sure if it will be any different to what I can change now.
Is it possible to disable the Qcoms in the options?

Any help would be great. Thanks

[mustangjeep]

Buy the ram clear then follow my video on how to do a ram clear.
Also follow the how to setup stand alone progressive how to if your machine is set with it.
Right now the machine is thinking it’s suppose to be hooked into a central computer system.
You need to set it up as a stand alone unit.


Bud

[Paulluap]

Buy the ram clear then follow my video on how to do a ram clear.
Also follow the how to setup stand alone progressive how to if your machine is set with it.
Right now the machine is thinking it’s suppose to be hooked into a central computer system.
You need to set it up as a stand alone unit.


Bud

O.K Thanks for that. I will buy a card and let you know how I get on. Cheers Paul

[Paulluap]

Well I finally got around to buying and installing the ram card into the bottom slot, I have no bonus game card.
See attached photos
Comes up with errors, not sure what to do now.

[tjlee]

K2V Manual says the solution for a 902 address error is to replace the cpu board.

[GamingNZ1LTD]

Hi if you have a Konami NZ K2V Pokie machine, NZ Motherboards run on Qcom. Motherboard will require a ram clear and software run to trick your motherboard to run stand alone. We are a service agent in Auckland that can qcom boards to run stand alone. Drop me a message if you require any help. Cheers

[Jaybee]

Hi,
I have a Konami motherboard that needs to be configured to run stand alone as it’s qcom.
Can you help with mine ?
Thanks

[Enzo Almada]

Hi everyone, i have a problem on a Konami K2V.

It show a 923 software error after ram clear

[Enzo Almada]

Hi,
I have a Konami motherboard that needs to be configured to run stand alone as it’s qcom.
Can you help with mine ?
Thanks

lets see it

[Thedog11]

If you are in NZ call Gaming NZ1 Limited, I have dealt with them and they are awsome and very helpful. If it is a K2V it's gona need a qcom software tweak they can arrange this

[Gene.loader]

Hi. Pm me, I can provide this qcom software to do yourself. Thanks