New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: jancsi on February 25, 2016, 02:17:39 AM

Title: Game Maker game identify by SMI
Post by: jancsi on February 25, 2016, 02:17:39 AM

I have 2 Game Maker MPU with following games:

MPU 1:
Main
V7M1000B0604-17 4Mb

Grafik
V7G10000000-1-02 U141 L94-0280
V7G20000000-1-02 U142 L94-0280


V7P P04860400-00 Joker Poker 92.39
V7P P00080400-01 Jacks 95.51
V7P K00480401-00 Keno 92.67
V7P X00020400-00 Mini Bingo 91.98
V7P Z27340402-02 Wake Genie 92.57
V7P E00040402-02 Wizzard. 92.60
V7P X00180400-01 Doors to R. 91.98
V7P K00370401-01 Trip Trou.Keno 92.51
V7P Z24070402-01 Tiple Tr. 92.58
V7P X00100400-00 Coverall 91.95



MPU 2:
Main
V7M1000B0604-17 4Mb

Grafik
V7G10000000-1-02 U141 L94-0280
V7G20000000-1-02 U142 L94-0280



V7P E00040402-02  C1001(EBB8)   Wizzard. 92.60
V7P Z27160403-01  C1001(E805)  Crazy Clowns 92-58
V7P Z76740402-00  27C512(A4A0)  ??? ???
V7P Z76750403-01  C1001(3B3C)   ??? ???
V7P Z70690402-00  C1001(3056)  Stars and Bars 90.73a


I can't find any imformation about V7P Z76740402-00 and  V7P Z76750403-01  SMI
Can anyone help me?

If I read its content with eprom programmer, can I find game name and payout %  somewhere in the binary content?
 

Title: Re: Game Maker game identify by SMI
Post by: ricker on February 25, 2016, 09:48:46 AM

Hey hey,

With the door adjar(open), turn jackpot key, depending on your mains, under diagnostics, find "memory check", usually at bottom.  press or select "memory check", then select "eprom checksum". Takes a little time to load, but will give chip info., ie percentage, game name, smi # etc.  Hope this helps, let us know. As a side note, if you press eeprom checksum, that screen shows you what your settings are when setting up machine and can be noted or written down should u need to set up machine in the future.

Richard

Title: Re: Game Maker game identify by SMI
Post by: jancsi on February 25, 2016, 01:20:02 PM

I haven't working Game Maker yet.

I have 3 Game Maker MPU and 2 backplane.

Has anyone Game Maker backplane wireing information?