New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: mikethebuilder on May 21, 2017, 01:30:45 PM
-
So I just bought a bally E-809-2 for my first machine without doing any research on them or this particular machine! Smart huh? the flourescents light up but the machine is dead, so I started to go through troubleshooting procedures. The power board was dead and the fuse for the powerboard was blown (it was also the wrong amperage) I replaced the fuse but still nothing, so I am guessing that I need a new powerboard. the j1 wafer is also blackened around the bottom two pins. My question is this, where can I find a new powerboard, and do I need to replace the j1 wafer as well...