New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Konami Games => Topic started by: tjlee on October 20, 2017, 07:26:08 AM
-
I have a Konami 3 reeler here with the side LCD monitor. I can't get the side monitor to sync and show info. IF I hook a regular computer monitor to it it then works fine on that monitor. I have tried 3 different monitors which I know are good and they all do the same thing. I don't have a manual for this and I can't find much info on it anywhere. Any ideas?? Thanks
-
Just a thought. When you use your P/C you are likely not using the power cable that plugs into the LCD. Make sure you have the 24 V. from that plug.
-
I have checked the voltage to the LCD and reads 12vdc which I think is the correct voltage to it. I have hooked these monitors to a laptop and can't get a picture on any of them using the power from the slot on them. I think I am going to try and power them with a different supply to see what happens. I can't find any info on this slot. I need a schematic or wiring diagram to see what is right on this. Thanks for the idea.