New Life Games LLC
Monitor Repair Log and Database. **Arcade and Gaming** => LCD and CRT Monitor Repair Tech Support => Topic started by: johnk on July 06, 2014, 04:39:13 PM
-
I have a Bally Gamemaker V7217ST (Evo) with the Tatung VT17827M21LH monitor, also labeled VT1770, manufactured in late 2003.
The monitor recently went out after turning the machine off and on a couple of times. Flickering, some static discharge in the back, and a nice smell of burning something.
It may be one of the parts that you commonly hear about that blow (cap, rectifier?, transformer, etc), but I don't know how to troubleshoot the board on this unit. I am technically savvy -- I just don't know much about CRTs.
Can anyone help with schematics, advice, or point me to a repair shop where I can mail in the board for repair?
Thanks. John
-
This is what I have, hope it helps.
-
Thanks -- that's a great reference to have if I'm going to try to troubleshoot the board.
You don't also happen to have a pinout diagram for the monitor chassis connector plug by any chance, do you? I have the monitor sitting on a workbench in the garage, and I'd like to try powering it up there so I can get a better look at the circuit boards in the back as it's doing it's thing.
Thanks. John
-
In the schematics section of the Game Maker manual is the pinout for every connector.
It should be in the downloads section.
-
Thanks ... Do you mean the "NLG File System" link? When I select that it tells me that I don't have access to the downloads.
Thanks. John
-
You have to become a contributing member to access the file downloads section.