New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: FORDF150 on August 03, 2019, 06:12:44 PM

Title: pn75510502 supper stepper 502 mpu board i issues
Post by: FORDF150 on August 03, 2019, 06:12:44 PM

can any one tell  how does the mpu board control the back light reels because
I have done  lamp reel test on my double diamonds machine s2000
plus am getting meters disconnected error  put in new cabinet card  and still get the same results
does the mpu control the back reels light   I  have a new light board but nothing works

Title: Re: pn75510502 supper stepper 502 mpu board i issues
Post by: qbert on August 03, 2019, 06:15:11 PM

Have you tried replacing the door I/O cards.

Title: Re: pn75510502 supper stepper 502 mpu board i issues
Post by: qbert on August 03, 2019, 06:28:59 PM

Also need some history. Was it working then died? Does it have coin handling, physical meters, printer?

Title: Re: pn75510502 supper stepper 502 mpu board i issues
Post by: FORDF150 on August 03, 2019, 09:56:32 PM

Quote from: qbert on August 03, 2019, 06:15:11 PM

Have you tried replacing the door I/O cards.

Quote from: qbert on August 03, 2019, 06:28:59 PM

Also need some history. Was it working then died? Does it have coin handling, physical meters, printer?

yes it did for some time  it has a printer and meters  and coin handling


I had bought a I/o card from spin inc .com I received it to day but now I put it in I have the same resolve with meter disconnected error 
I was wondering if the mpu board have some thing to do with because I have other issues as well  my back light reels dont light
I had put in a new light controller board  and done a  reel lamp test and nothing  am thinking it could be  the mpu board
or I have a defective  I/o board cabinet coin out meters this is who I bought the cabinet I/o card off of

Title: Re: pn75510502 supper stepper 502 mpu board i issues
Post by: qbert on August 04, 2019, 05:57:24 AM

Make sure you don't have any bent or broken pins on the I/O card. It is possible the mpu could be the problem. Again make sure no pins are bent or broken on the mpu. How does it look where the Varta used to be? Do you have a spare you can try?

Yes the door I/O is an integral part of the backlit reel control.
I'm assuming all I/O cards are metal cased ones as you can not mix with a plastic cased one in the door.
With the power off try reseating all plugs on coin handling, meters, hopper, etc. ( senet devices).

Title: Re: pn75510502 supper stepper 502 mpu board i issues
Post by: FORDF150 on August 04, 2019, 06:49:24 AM

Quote from: qbert on August 04, 2019, 05:57:24 AM

Make sure you don't have any bent or broken pins on the I/O card. It is possible the mpu could be the problem. Again make sure no pins are bent or broken on the mpu. How does it look where the Varta used to be? Do you have a spare you can try?

Yes the door I/O is an integral part of the backlit reel control.
I'm assuming all I/O cards are metal cased ones as you can not mix with a plastic cased one in the door.
With the power off try reseating all plugs on coin handling, meters, hopper, etc. ( senet devices).

there's no bent pins on the door or cabinet cards am still trying to figure out why that aren't working  back lights aren't working

all the i/o card  are metal because i had bought a i/o card off of spin .com

Title: Re: pn75510502 supper stepper 502 mpu board i issues
Post by: qbert on August 04, 2019, 07:53:36 AM

How does the mpu look like is there any alkali damage?
What about the door I/O? You only have talked about the one you bought from spin.
Have you tried reseating senet devices?
Do you have a spare MPU.

Title: Re: pn75510502 supper stepper 502 mpu board i issues
Post by: FORDF150 on August 04, 2019, 09:14:10 AM

Quote from: qbert on August 04, 2019, 07:53:36 AM

How does the mpu look like is there any alkali damage?
What about the door I/O? You only have talked about the one you bought from spin.
Have you tried reseating senet devices?
Do you have a spare MPU.

no I dont have a spare mpu at this moment
how do you reset the Senet what does that do exactly do

Title: Re: pn75510502 supper stepper 502 mpu board i issues
Post by: qbert on August 04, 2019, 09:41:37 AM

Senet devices are chained like netplex
Senet devices include hopper, meters, reel controllers, and a few more. There is no reset like netplex but with the power off reseat any plugs going to those devices.
When you reboot what errors are you getting?

Title: Re: pn75510502 supper stepper 502 mpu board i issues
Post by: FORDF150 on August 04, 2019, 10:02:43 AM

Quote from: FORDF150 on August 04, 2019, 06:49:24 AM

Quote from: qbert on August 04, 2019, 05:57:24 AM

Make sure you don't have any bent or broken pins on the I/O card. It is possible the mpu could be the problem. Again make sure no pins are bent or broken on the mpu. How does it look where the Varta used to be? Do you have a spare you can try?

Yes the door I/O is an integral part of the backlit reel control.
I'm assuming all I/O cards are metal cased ones as you can not mix with a plastic cased one in the door.
With the power off try reseating all plugs on coin handling, meters, hopper, etc. ( senet devices).

there's no bent pins on the door or cabinet cards am still trying to figure out why that aren't working  back lights aren't working

all the i/o card  are metal because i had bought a i/o card off of spin .com

or do I have the right I/o cabinet card part #p/n75427601 -rev a is this  the correct one  for the back light reels

think I  figured it out  I had the plugs on the back board I got the wrong not I got the back reels to light  now they stay on