New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: ramo2519 on September 21, 2021, 09:11:32 AM

Title: Wiring Harness Question for 4th Bonus Reel Chasing Lights
Post by: ramo2519 on September 21, 2021, 09:11:32 AM

Hope Everyone is doing fine..

I have a Triple Diamond 9 Line, 3 Reel backlit (Incandescent), S2000 Upright, 504 B

Attempting to add a 4th Bonus Reel (Converting to Super Spin Sizzling 7 eventually).

Reading from various threads, I figure that I am supposed to plug the 5-reel harness to the MB and the backlight controller
(i.e. the main long black plug goes to the MB, then the 14 pin and 10 pin connects to the backlit controller, with the 4th reel on jumpers)
Then I am attaching another jumper on the 2 pins by the MB (to recognize there is a 4th bonus reel)

My question is for the separate wiring harness that are coming from the Bonus Reel's Chasing Lights, where do I plug them?
There are two plugs both are 12 pins. Does one plug go to the spare SENET at the MB? then what about the second Female Plug? (is the harness acting like a bypass in case there is no spare SENET?)

Thanks For the Help Guys!
 

Title: Re: Wiring Harness Question for 4th Bonus Reel Chasing Lights
Post by: RB on September 21, 2021, 09:49:18 AM

Disconnect the cab senet harness from the MB. Plug in the extra harness from the chasing LEDs and plug the one you disconnected into the female connector. This just makes a series of the 2 harnesses.

Title: Re: Wiring Harness Question for 4th Bonus Reel Chasing Lights
Post by: sixcardmark on September 21, 2021, 01:15:41 PM

Yes, if you do happen to have a spare senet port on backplane you can jut plug it in there.  That's what I did with mine.

Title: Re: Wiring Harness Question for 4th Bonus Reel Chasing Lights
Post by: ramo2519 on September 21, 2021, 01:31:54 PM

Thanks for the info RB and Mark!!! Stay SAFE! 

Title: Re: Wiring Harness Question for 4th Bonus Reel Chasing Lights
Post by: therockinelvis on September 21, 2021, 04:28:45 PM

If using a 500 series, here is the spare senet

Title: Re: Wiring Harness Question for 4th Bonus Reel Chasing Lights
Post by: ramo2519 on September 21, 2021, 09:45:12 PM

OK I run into my first issue. I just noticed that my backlit controller does not have a 10 pin connector in it. it has 8 pin on J4.

So I left the 10 pin plug disconnected and tested my unit. Surprisingly all the functionality worked minus the backlight on my bonus reel. (Is it related to J4 plug that I left disconnected?)

Do I need a new backlit controller? one that has the 10 pin connector? (I have seen a 5 reel led controller on fleabay is that going to work?)

See photos. (Credit to the owner of the photos from NLG) (Thanks Elvis for the tips! I got no spare SENET So I made a Series Connection)

Title: Re: Wiring Harness Question for 4th Bonus Reel Chasing Lights
Post by: sixcardmark on September 21, 2021, 10:20:49 PM

Yep, I had to swap controllers too.