New Life Games LLC

**Reel Slots** Gaming Machines => Other Reel Games => Topic started by: tmiron on September 04, 2023, 09:58:11 AM

Title: Can't get past -0- on Summit Slot Machine
Post by: tmiron on September 04, 2023, 09:58:11 AM

Hello, I picked up a Summit slot machine and the coin payout kept gettting jammed but now it is reading -0- on the tilt bar.  Per HMS document below I pressed the hopper reset button, but it will not get past it.

Please help!  Pics and reference links below - Thank you!

http://www.hms-electronics.com/slot_machines/codes.htm (http://www.hms-electronics.com/slot_machines/codes.htm)

Title: Re: Can't get past -0- on Summit Slot Machine
Post by: BigWick on September 06, 2023, 10:44:52 AM

There has to be multiple ROM revisions with different meanings and error codes because on my machine a -0- clears as soon as you coin up and pull the handle. It's not a tilt so much as an operator warning.

Title: Re: Can't get past -0- on Summit Slot Machine
Post by: tmiron on September 06, 2023, 02:06:10 PM

Thank you the return switch was hung up - that let play continue - another issue I am having is the payout is not counting even though the coin payout switch is working- any ideas? Thx Tim

Title: Re: Can't get past -0- on Summit Slot Machine
Post by: BigWick on September 06, 2023, 02:27:40 PM

I *think* the coin-out counter interfaces through pin 6 of the ILQ4 optocoupler on the CPU board. If that goes bad and an ILQ4 isn't available I have stolen the ILQ2 from an IGT NetPlex Microtouch controller.

Title: Re: Can't get past -0- on Summit Slot Machine
Post by: tmiron on September 07, 2023, 02:35:18 PM

Thank you for the info !