New Life Games LLC
**Reel Slots** Gaming Machines => IGT M Slot Reel Games => Topic started by: Jlagfl on December 06, 2014, 06:11:54 AM
-
Having problems with reel 3. Tested it in the input section and it is not seeing reel movement. Swapped the assembly with reel 2 assembly and the problem follows the assembly. The ribbon appears to have continuity so i think the problem is the photo detector. Does anyone have a photo detector or part # of a replacement ?
-
Have available a good tested actuator, if interested.
-
Gordy do you possibly still have one available? I think my optical sensor is bad on mine.
-
Hi all
Don't want to hijack this thread but my problem is also with the reel actuators. When I start the machine the cam turns over pushes the actuators into the correct position (I made bearings with my cnc machine out of MDF wood, probably wont last long :rotfl: ) but the coils don't fire.
I have connected power directly to the coils and they are definitely working.
I have checked and traced all wiring and it seems to be good.
This problem is on all reels as I tested them by using the Reset switch and menu.
Could it be possible for some of the transistor to have blown on the Main board (MPU) ?
Thanks in advance.
-
New one to me. May have a board and a couple agitators for sale but it would be a stab in the dark. Those agitators are hard to tell if they are working but I have a working M slot and can test.
-
Hi Gordy
Thanks for your reply.
How much for the board and 3 actuators ?
Are the boards universal to all 3 reel games ?
In the meantime I have some electronic boffins checking out my board and Transistors.
Regards
Pieter