New Life Games LLC
Progressive Controllers and Displays => Mikohn Progressive Systems => Topic started by: fandy on July 15, 2015, 11:14:33 PM
-
Good Day To All,
First of all I would like to say hello to everybody and God Bless .
Guys, I have everything here but somethings missing maybe your helping mind. I do have the supreme display,mikohn controller,PC with DOSBOXPSP installed. The only thing that I wanted to have is that to run some promotional messages on our poker supreme display.
I already configured the jackpot but i'ts not a link becuase I just received the break out board and I need to wait more time to do ram clear beacuase we are still in operation at this time . I did some messages on mess.do and as you can see on the picture it shows file sending mess.do. I tried to connect to the supreme but it didn't works.
Did I missed up the connection or something? Any helps will be much appreciated.
Thanks
Fandy
-
What controller are you using to drive the jackpot value?
Try adding your message to the jackpot.do instead of the mess.do
-
thanks for the reply I have CON2-V2.05 and CON2-V4.01. I used to do this in the other ships but I had a doubt for U17eprom becuase it's removed .
Best Regards.
Andy.
-
It's been a few years since I've done any Supreme programming, but I seem to remember that I would send the files to the display using the Mikohn Windows Download program, not PSP.
-
Thank you for the info. I will try to do with Mikohn windows download program and I will post the result . Thank you once again.