New Life Games LLC
NLG Classified ads and White Sheet => NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! => Topic started by: Jim on November 09, 2015, 08:07:35 AM
-
working board plus one non working 50.00 has the two individual power supplies on a plate with isolation transformer +5 vdc and +12vdc . 50.00 plus shipping, has all the switches, distribution board, coin optics, comparitor 12 vdc/inhibit, hopper control board, key switches C5500 key, lock assembly and cam, glass etc. etc.
let me know what you need. Jim
-
Hi Jim, What would it cost me for the Upper,lower and middle door glass?including Shipping? Zip Code 86046, AZ
Thanks, Tom AKA _Z71OFFROAD
-
Do you still have parts for this machine? Erik
-
What are you looking for? I parted one out a couple years ago and I think I still have a few parts..
-
I bought this jokers wild machine, but it's missing some parts.
- I am missing the top left button, as you can se on the photo.
- Also the coin head insert I have is for coin acceptor, not comparator. So if you have the coin head insert without the jam button on.
- I am missing most parts for the door lock mechanism, on door and cabinet.
- Missing reset keys
- Missing light and mount insided top glass.
Maybe more, I do not have a complete overview yet.
(https://s27.postimg.org/xorsy62cf/jokers_wild.jpg) (https://postimg.org/image/xorsy62cf/)
-
Is the reset switch the normal 2341 type of reset switch? If so those keys are fairly easily found and ordered. If it is a lesser-known reset switch it might be easier to replace the complete reset keyswitch.
examples, may find better pricing elsewhere:
http://www.spininc.com/01465-0 (http://www.spininc.com/01465-0)
http://www.spininc.com/02562-0 (http://www.spininc.com/02562-0)
-
I bought this jokers wild machine, but it's missing some parts.
- I am missing the top left button, as you can se on the photo.
- Also the coin head insert I have is for coin acceptor, not comparator. So if you have the coin head insert without the jam button on.
- I am missing most parts for the door lock mechanism, on door and cabinet.
- Missing reset keys
- Missing light and mount insided top glass.
Maybe more, I do not have a complete overview yet.
(https://s27.postimg.org/xorsy62cf/jokers_wild.jpg) (https://postimg.org/image/xorsy62cf/)
I just picked up the same machine. Got mine working just can’t get the bill feeder to work.
-
I don't think B52 machines had a bill unit, SG112 Sigma machines did have bill units incorporated in them. make sure its turned on,
Jim
-
The B52 I owned a few years back did not have a bill acceptor. It was coin only.
-
All my B52 machines are coin only. Don't know if someone rigged up a bill unit or not!
-
Would you still have the hopper, count tray, lock assembly, and collect and cancel buttons?
-
Got the buttons, looking for the hopper and tray.
-
Justin, I have two hoppers, one side eject and one for a slant top. have buttons, lock and cam, no coin tray. will take a picture of the hopper after Christmas.
Jim
-
How much would you charge for that all?
-
Jim: I just stumbled on to this post, but I would be interested in the two power supplies and the boards. If there still available! Thanks
-
How much would it cost me to get the side eject hopper(pictures would be great if you have some), lock and cam, and wiring harness with the boards and buttons connected?
-
here are the pictures, side eject hopper, slant top hopper, hopper payout boards, display panel, button panel, key locks, lock cam, etc.etc.
Jim
-
The side eject hopper is the one I need. How much are you thinking for the hopper, lock and cam, wiring harness with boards, and buttons?
-
Do you still have the gameboard for it?
-
Hi Jim,
I could use the B52 gameboard if you still have it.
Thanks Dave (916) 765-6169