New Life Games LLC

Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Arcade Games **Video** => Topic started by: jpatrik on February 11, 2016, 02:54:08 PM

Title: Midway`s Cruis'n USA
Post by: jpatrik on February 11, 2016, 02:54:08 PM

game is having a restart issue after it has been on a couple hours , rom test all good  , not sure if it is a watchdog timer issue or not , I worked on these games for H betti Industries when they first came out but  unfortunately it has been to long for me to remember  , :Scratch-Head:  although what I do remember was a cap mod on the board near or around the battery  not sure if cutting a trace was included ? I cant even locate the service bulletin  when This issue was happening  , Can anyone please help me  ?  many thanks in advance ! :EmoticonHelp4:

Title: Re: Midway`s Cruis'n USA
Post by: Winslow on February 19, 2016, 09:51:24 AM

I had a Cruisin' USA doing the same thing.  I replaced the switching power supply with a new unit and everything has been fine ever since.  YMMV

Title: Re: Midway`s Cruis'n USA
Post by: jpatrik on February 19, 2016, 12:06:13 PM

thank you for the input ! I tried that also with no luck at all   :Scratch-Head:

Title: Re: Midway`s Cruis'n USA
Post by: KaPH33n on July 20, 2020, 10:39:49 PM

When you test the 5v, see if there's a drop between the PSU and at the PCB. Or if you want to go crazy check at the chip level. If so adjust the PSU so that the board edge is at 5.0-5.1v. That should help with intermittent reset issues. basically the power draw is fluctuating slightly. it may eventually hit a point where there's enough amperage draw to cause a small voltage drop where the chips no longer are able to work correctly for a split second and this causes a reset.

edit: for some reason the text was showing up tiny? I modified the font size to be legible.