| **Reel Slots** Gaming Machines > IGT S-AVP (REEL SLOTS ONLY, NO VIDEO) |
| Stuck in boot |
| << < (2/3) > >> |
| rickhunter:
Did you try replace the power supply on the mpu, not just the main power supply? |
| 474lsa:
replace the ribbon cable from the pci card to the backplane. |
| tjlee:
I don't know how good you are at taking the cpu board out of the case. Remove it and remove heat sink on main processor. Heat transfer grease drys up on these over time causing over heating and rebooting of these slots. Also check if fan on main processor is working. |
| Slotman:
I good rule of thumb is to determine the extent of the reboot. 1. If you do not hear the POST beep more than likely its a software issue or issue related to peripherals (including the IO card) 2. If you hear the POST beep than it is usually related to the CPU side. Check processor, power supply, connections, etc. |
| Delma:
Copy that. I have a working MPU in a machine that's not in service. I can use that one for this machine. I'm just very unfamiliar with the diagnostics of this machine. I wouldn't know how to clear and set back up. I have ekey 7 and diagnostics key but that's just in case I've had to use it. I think I used the ekey to change the denom for both 25 cents and 1$. That's all I've ever had to do. |
| Navigation |
| Message Index |
| Next page |
| Previous page |
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |