New Life Games LLC
Coin Comparitors and Other Coin acceptors => Coin Comparitors and Other Coin acceptors => Topic started by: haim890 on June 29, 2021, 10:57:03 PM
-
Hey,
Hope everyone is doing well. I have an old Sigma "Double your money" SG - 112B machine with an old coin comparitor. Besides from the bill acceptor not working, the coin comparitor seems to be broken too. When I drop a coin in the slot, the coin is dropped back to the player. I believe this coin comparitor is the CC-16 12VDC one--very old. The LED is red, so I tried cleaning the mechanism as well as properly seating the 'example' token. Here is an image of the comparitor:
https://imgur.com/a/gjptDZX
I am completely stumped. I do not know what is wrong with it :(. Any help would be appreciated! Also if nothing else works and someone has a replacement I can buy, that would be great!
Thanks!
-
Try replacing the quarter with a different one. If that does not help, turn the pot adjustment fully CCW .
-
remove the cover plate on the cc-16, take a picture of the board, I may have replacements.
there were two types of board, check to see if your bill unit is enabled, it done through the menu.
Jim
-
I have 2 Sigma 112B and both comparitors have the red LED light. Make sure you check all of the connections and follow the wires back the PCB board on the door.
I took a picture of my comparitor and will attach it for your info. If all connections are ok I'm like Jim I would think it could be the board is bad. Hope this helps.
-
I have 2 Sigma 112B and both comparitors have the red LED light. Make sure you check all of the connections and follow the wires back the PCB board on the door.
I took a picture of my comparitor and will attach it for your info. If all connections are ok I'm like Jim I would think it could be the board is bad. Hope this helps.
Hey, thanks for the help! So i am guessing that all the comparitors in the Sigma 112bs have red lights even when functional? Thats really weird. Anyways, with all the help here, I manage to clean up everything/reset the machine to get it working again (with the red light). I was initially confused, but i guess it works.
Thanks!
-
remove the cover plate on the cc-16, take a picture of the board, I may have replacements.
there were two types of board, check to see if your bill unit is enabled, it done through the menu.
Jim
Hey,
Thanks for the response. Somehow I got it working again by cleaning and resetting the machine, though I can seem to get the menu on my machine. By using the reset key and plugging in the right wires, I saw the payouts and inputs, but no menu. I am kind of a newbie to these machines, so if you know where to find the menu, please LMK.
Thanks!
-
Try replacing the quarter with a different one. If that does not help, turn the pot adjustment fully CCW .
Thank you! This worked!