New Life Games LLC
Bill Validators, Currency Acceptors and Printers => MEI Mars Bill Validators => Topic started by: Nepa Coin Op on October 31, 2019, 06:36:23 PM
-
Have a mars yellow head here in a bally s6000
It rejects all $100 bills, I don’t have a flash programmer for this head.... is there any way to get this to take 100s without reflash ?
Thanks
-
if you have a ppm advance you can change the bill inhibits that way. otherwise the only other way is to have it re flashed i'm afraid
-
Does anyone have any program coupons? I have seen one in use before but never have found any. I think you can just print copies from a download.
"Changes to the MEI bill acceptor settings can also be accomplished through the use of a coupon program configuration. The coupon can be programmed by filling in the code slots with a #2 pencil. All switches must be set to off before the coupon programming can take place. Insert the coupon and the desired program changes are electronically changed."
-
Does anyone have any program coupons? I have seen one in use before but never have found any. I think you can just print copies from a download.
"Changes to the MEI bill acceptor settings can also be accomplished through the use of a coupon program configuration. The coupon can be programmed by filling in the code slots with a #2 pencil. All switches must be set to off before the coupon programming can take place. Insert the coupon and the desired program changes are electronically changed."
that's what they put in print, but i could never get them to work. hopefully this link is acceptable(its where i got the coupon to print) http://slot-tech.com/interesting_stuff/mei/SC66_Maintenance_&_OPs_Guide.pdf (http://slot-tech.com/interesting_stuff/mei/SC66_Maintenance_&_OPs_Guide.pdf)
-
ill try the coupon thatll prob do it, i did find another updated head here so im covered either way, i forgot about the coupons
Thanks