New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: CHANGING Bill Validators ASSEMBLY WBA TO A MCI IN A BALLY S 6000  (Read 2243 times)

0 Members and 1 Guest are viewing this topic.

Offline trashman

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 305
  • Reputation Power: 29
  • trashman New User barely matters.trashman New User barely matters.
  • Gender: Male
  • NLG
OK so my bally 6000 had a wba  Bill Validators.i ordered one from a guy on here he sent me a mci.bill validator turn on then off.so i was told its the same as a mars so set dip switchs to manual.so the same thing.by passed bill door cheery switch.no help.ok may have gotten a head of my self battery was dead on board replaced it and the 2 chips where missing i replaced them with the Leave-In Safe ram Main/Clear Chips.i think it was chip 23 and 48.so i was told it maybe a option i need to set in 11b here is the list i didnt see any thing for that validator.so i noticed there is extra wire on harness do they need to go some where also the harnes that plugs into board and validator wire dont line up,well here some pics maybe some one can help thanks 

Offline trashman

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 305
  • Reputation Power: 29
  • trashman New User barely matters.trashman New User barely matters.
  • Gender: Male
  • NLG
Re: CHANGING Bill Validators ASSEMBLY WBA TO A MCI IN A BALLY S 6000
« Reply #1 on: January 16, 2020, 11:16:55 AM »
dip switchs

Offline trashman

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 305
  • Reputation Power: 29
  • trashman New User barely matters.trashman New User barely matters.
  • Gender: Male
  • NLG
Re: CHANGING Bill Validators ASSEMBLY WBA TO A MCI IN A BALLY S 6000
« Reply #2 on: January 16, 2020, 11:19:32 AM »
more pics

Offline Jim

  • 1-513-984-2201
  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2973
  • Reputation Power: 300
  • Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: CHANGING Bill Validators ASSEMBLY WBA TO A MCI IN A BALLY S 6000
« Reply #3 on: January 16, 2020, 11:44:44 AM »
Bob,   give ma a call      I may have sent you the wrong MEI unit,   didn't see the RS232   on the head.    I have another unit I can send you. 

If some one who knows Bally 6000  could respond to that being a mismatch ( A rs 232 in a Bally 6000. )

Appreciate it in advance.

Don't panic Bob we will get it figured out!

Jim



Signature:
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma, Bally Alpha's , Williams-550, DOTS, BBU I don't have a WEB SITE, HOWEVER, I have hundreds of parts and reel strips and glass. If you need something, call or send me a pm. 

Offline trashman

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 305
  • Reputation Power: 29
  • trashman New User barely matters.trashman New User barely matters.
  • Gender: Male
  • NLG
Re: CHANGING Bill Validators ASSEMBLY WBA TO A MCI IN A BALLY S 6000
« Reply #4 on: January 16, 2020, 12:22:46 PM »
its there

Offline Jim

  • 1-513-984-2201
  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2973
  • Reputation Power: 300
  • Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: CHANGING Bill Validators ASSEMBLY WBA TO A MCI IN A BALLY S 6000
« Reply #5 on: January 16, 2020, 12:50:42 PM »
Bob,   just spoke to Scott, he told me what the problem was!   its the yellow harness, that harness is for a Bally Alpha, you need a red harness, that one is for Bally 6000.   I will send the harness tomorrow,  you will have to do the following:  pull out the head,  pull out the cash can,  pull out the logic board from the housing, (it pulls straight out, be care full not the grab the switches on the bottom) take pictures if you need too,  now remove the two screws holding the harness plug, remove the plug and harness.  NOW before you install the red harness and plug, see how it will be placed in the housing so it will align with the board, then secure it with the two screws,  put the board back in, put in the cash can, put in the head, hook up the plug from the backplane.

I was told the RS232 will work in that machine.

inspect all around and make sure everything is correct, then turn on the machine and see what happens,  the dip switches have to be off off  as pictured.

Jim



Signature:
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma, Bally Alpha's , Williams-550, DOTS, BBU I don't have a WEB SITE, HOWEVER, I have hundreds of parts and reel strips and glass. If you need something, call or send me a pm. 

Offline trashman

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 305
  • Reputation Power: 29
  • trashman New User barely matters.trashman New User barely matters.
  • Gender: Male
  • NLG
Re: CHANGING Bill Validators ASSEMBLY WBA TO A MCI IN A BALLY S 6000
« Reply #6 on: January 16, 2020, 01:30:58 PM »
ok sounds good thanks jim

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal