New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. => Topic started by: Delma on January 14, 2022, 06:41:51 PM

Title: Machine cycling
Post by: Delma on January 14, 2022, 06:41:51 PM

Got a new issue with one of my 22/32 machines. Just about to very hour the machine cycles. Goes off and comes back on randomly by itself. I did notice that the topper display has went blank tho it’s not throwing an error like it’s not finding the topper.

Title: Re: Machine cycling
Post by: rickhunter on January 14, 2022, 07:24:15 PM

I would try replacing the mpu power supply and/or memory modules.

Title: Re: Machine cycling
Post by: Delma on January 14, 2022, 09:00:06 PM

Quote from: rickhunter on January 14, 2022, 07:24:15 PM

I would try replacing the mpu power supply and/or memory modules.

Thanks Rick. I can definitely try new mpu power supply but I’d definitely be lost as the where the memory modules are. Any guidance on where they are is appreciated and I’ll change those out too.

Title: Re: Machine cycling
Post by: rickhunter on January 15, 2022, 09:10:32 AM

Memory is on the left had side toward the front of the mpu.  There are 2 modules installed horizontally on sockets that are on top of each other.

Title: Re: Machine cycling
Post by: Delma on January 18, 2022, 05:51:42 PM

Quote from: rickhunter on January 15, 2022, 09:10:32 AM

Memory is on the left had side toward the front of the mpu.  There are 2 modules installed horizontally on sockets that are on top of each other.

Thanks Rick. I'm not sure which one it was. I changed both and machine is working perfectly fine. Thanks for the help.