New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. => Topic started by: sakwilla on February 16, 2019, 06:05:59 AM

Title: Playing Bally V32 games on a 22/32 machine
Post by: sakwilla on February 16, 2019, 06:05:59 AM

I purchased some Bally V32 games from ebay as the seller told me I could play them on my 22/32 machine (I got Willy Wonka and Cirque Du Soleil) Was told that i needed to purchase DVI to Vga and vice versa adapters (which I did) but after hours of trying to work out where to plug everything nothing seems to be working.


Someone mentioned I could swap the cables attached to each of the 22 and 32 screens to get it to work - is this right? Do i need to do anything else or will this be enough?


Finally if I can swap them around - how do i pull open the 32 inch top screen - cant find a yellow handle anywhere and have had no luck looking for a 22/32 manual either.


Thanks in advance :)

Title: Re: Playing Bally V32 games on a 22/32 machine
Post by: Grimreaper27 on February 16, 2019, 02:08:10 PM

For those games, you need to plug the topper to the secondary monitor port on video card instead of the vga card where the ideck is connected to. If the system doesn’t detect a topper connected to the video card, the game is not gonna load up. Try that and let me know if you get a different result. In this case you need a dvi to vga converter. You can get them on amazon for a very good price.

Title: Re: Playing Bally V32 games on a 22/32 machine
Post by: RVC on February 17, 2019, 09:34:18 PM

.