New Life Games LLC
**Reel Slots** Gaming Machines => SIGMA Reel Games => Topic started by: Botiemad on September 16, 2023, 02:17:41 PM
-
Replaced comparator. Reseated all connectors and ribbon wire. No faults current displayed. -3 indicated in coins played. Replaced RAM battery, reads just over 3V. What needs to occur to enable comparator coin drop solenoid to retract to the accept position?
If I prop the coin accept solenoid in the accept position, I can get 3 coins to play, and actually won. Then the machine defaults to "Meter Wire Cut". I can make this fault go away by removing the coin drop prop. Then, no fault is displayed and it will no longer accept coins. I'm at a real loss here. Thank you.
-
Moved to Sigma Reel Games. :yes: