New Life Games LLC
NLG Classified ads and White Sheet => NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! => Topic started by: markb7605 on February 08, 2017, 02:50:54 PM
-
I have for sale a great set of reels for bally em machines make offer.
-
iI'm interested in these I need them for a model 700 series machine the circumference of mine are 26-1/4" around that's about 8-3/8" across in diameter.
I don't need the reel tape shaft or plates just the reels but will accept the entire bunch if you are not willing to just sell the reels. I've been looking on eBay and usually there are some available but so far this week I haven't seen any, I will pay $30 for the reels shipped. That seems to be the going price on eBay for both used and new reproductions. Since the plates match the tapes I wouldn't be able to use them and would be best to keep them together.
Let me know if this sounds good to you I can pay with pay pal immediately.
Thanks Robert
I'm in Peoria AZ 85345
-
pm sent
-
Thanks for the quick shipping, they are going to work out perfectly! Nice and true plus they are good spinners. I really needed to get these to finish it up right. i will need to paint the edges black to match the theme. I may look for some fluorescent tape or maybe even just use some black electrical tape to provide a smooth look even over the crimped areas.
I loaded my strips and they look great, I will post pictures of the entire machine once it's completed. Still trying to figure out what's wrong, I have solved 1 problem but then have another. At least now it's just not paying out at all unless it's a SirPrize jackpot so that makes it much simpler. I took a break once I put it all back together and found it had no payout, figured I'd go at it again tonight, this should be a very simple fix now. I think my Beau plugs are getting worn and some connections are loose and pushing out the back as well as 2 pushing inside the reels. I moved the wires to new solid pins and along the way I documented all wires and found a few that are not being used as well. Looked up what they were for and found them to be unused on my version as it is right now. Removed all wires and stripped fresh ends and soldered them back on with shrink wrap on each post, this should make for a problem free machine for quite some time. I really should replace those beau plugs, I have a set of extra large, 30 pin plugs which won't fit unless I modify the openings. Do you have any extras to sell? It looks like I need a set of 24 pin. I have a set now but I'm using them on my service extension cables and don't want to tear them apart since they took forever to make them. I just might use them if I have too. For now I'll be OK and just keep my eyes open for a set. Maybe someone would trade me a set of 24 pin for my 30 pins?
Thanks again,
Robert
-
you wouldn't happen to have a few reel wiper boards you could sell, i need 2 boards, broke the top corner on 2 of them. still work but need to be replaced. I can wait if you don't.
-
yes i do
-
That's good news you want to sell 2 of them? while I was putting the final last tweaks on my machine I had a chain reaction with 5 or 6 golf bags each had full sets of clubs, the line started at my garage door and went along the wall to the back. I had my reels on a large speaker while I was making a new switch stack to get the end of spin pulse to my sirprize unit before the reels stopped spinning to prevent partial payouts if the Sir Prize JP was hit before the unit steps to end the sirprize feature payouts. I was carrying something that caught the last bag and tipped it over, then 1 at a time they hit each in the row until the last bag tipped and caught the locking arms and pushed it off the speaker onto the concrete right on the wiper boards breaking 2 of them 1 in half and the corner of the other.
I stood in disbelief watching it happen with no way to stop it, I never would have considered it to go all the way down the line, let alone possibly end up catching the arm.
Tell me what you'll need for them and I'll get you the cash.
Sorry about my delayed response I've been busy trying to catch up on some shipping myself.
Thanks again for the great service!
-
if your box is still full email me bigelow9285@hotmail.com
-
did you get me emails with my address? I made payment right when i said I would to your pay pal account. I saw another response sent to my email but when i clicked the link it showed nothing.
-
iv emailed you like 15 times and never get any thing back it was sent on the 15th i sent you the tracking the usps is bs here ill let everyone view tracking to show the bs 9405 5096 9993 7416 1246 72 i even sent u a pic of the shipping
-
did you get my message
-
you sent money on 3/12/17 u didn't send me your address till 3/15/17 that's when i shipped i cant control USPS it was ship small flat rate box so it wouldn't get damaged
-
Don't worry I'm not in a rush, the machine still works like it is, I was just checking to make sure that you got the address and the payment, I forgot about it for a while because I have a lot going on right now myself, I'm shipping large items everyday and I pack up 2 or 3 every day after I do a test and record that test to burn to a disc to send along with so I'm busy just trying to stay ahead on my own shipping. I finally was able to get some large printing photo paper sheets so i can finally do my upper glass and belly glass as well as my finalized reel strips that I've printed about 30 sets of so far. It's getting close to 100 degrees here already and I need to get this finished before summer hits. I'm not going to spend much time in the garage this year.
I appreciate all you have done and don't think I'm not grateful, I wasn't trying to pressure you i just wanted to make sure you had everything you needed while I had the time to check. I think about stuff but when i go to check on it I run across something that I need to look into closer and find it needs my immediate attention and I'm easily sidetracked with constant ebay problems and questions. So I try to do things while they are in my mind.
thanks again,
Robert
-
I just wanted to say thanks again, everything worked out great! you have been so helpful on getting this one finished up, 3 months of work finally comes to an end.
-
Your welcome glad I could help