New Life Games LLC
TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories => Bettor Slots TITO - Ticket in Ticket Out => Topic started by: Iwilframe1 on September 23, 2020, 07:48:34 PM
-
Ainsworth A560 TITO Institution instructions
There are some criteria that need to be followed before your Tito will work in a A560.
(Disclaimer there may be shortcuts I am no expert at A560.)
I used Bettor Tito device WMS BB1/2 cable. These are the other items that you will need.
1. International base chip.
2. Epic 950 transact printer.
3. Mars bill validator.
It may work with other Printers and Validators but the above is my software and hardware.
Install your Tito board in the location that you desire and run your connection cable to the backplane I added a separate power source for the Tito board.
(https://newlifegames.com/nlg/blob:https://newlifegames.com/d37a8eae-7892-4e4a-b8e5-68a02bcc3636)
1.Install your Tito connection to (ACOM1) on the backplane.
(https://newlifegames.com/nlg/blob:https://newlifegames.com/7c6eeede-9c9f-4725-b24b-1f08a5461348)
2. You can do a Partial ram clear and start the configuration.
3. On photo that shows multi host configuration you will select yes on that screen.
-
#2 Finish the rest of the set up on the machine. Save, close the door you’re ready to go.
-
:applause: :applause: :applause:
Very nice post, I'm sure someone will be very happy to know its possible to work with a Tito.
:thank_you:
-
Thank you Jim,
Th[/size][size=78%]ese machines are now starting to come on to the market for the home. It’s always nice when you can get some help with items that improve the enjoyment for the home use. I am still working on getting it put down on paper and get a video to put together. I will also by putting together a ram clear video some time soon.[/size]
Again thank you.
Jim
-
Hello!
Thanks for your awesome setup guide!
Do you know to do this on any other base os exept the international one?
Best regards