New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Iamwally on July 09, 2023, 08:28:58 AM
-
Hi guys! New to all this Bally stuff and just trying to figure it all out! Is there a way to use leave-in mains with a printer? Or is that not possible? I thought I read a document somewhere that mentioned activating printer using Tito board?🤷♂️
Thanks,
John
-
1. 2003 mains with printer support and printer, no TITO. Use removeable clear chips for RAM clear.
2. Leave in clear chips/mains and no printer support, (maybe TITO? but I don't think so)
3. 2005 or newer mains and TITO board and printer. Use removable clear chips to clear RAM.
-
Thanks for that info! Next question……how can you tell which mains you have?🤣
Thanks,
John
-
Post a picture of your mains
-
Not sure if this is gonna help!🤣
-
If you use switch #8 on DS1 to do a clear , those are leave in clear chips. Otherwise not sure what you have.
-
I doubt those are leave in clears because the board doesn’t have switches if you look it still has grey shunt blocks. At least I assume?!🤷♂️
Thanks,
John
-
Yes! Correct! Not sure what they are. Does your ticket printer work? Could read the checksum and maybe find out.
-
You should remove all 3 of those shunt blocks and replace them with 8 position DIP switches.
Take control of your board!