**Reel Slots** Gaming Machines > Aruze Reels Slots
Communication #5 Error (NOK 1 PCB)
Iamwally:
Just for everyone’s future reference in this particular machines case it turned out there were 2 bad reel driver boards which I actually think were causing the noki pcb error. So my advice is if you can’t seem to solve the noki pcb error check to make sure your reels are operatiional. 2 of the reels never locked up when power was turned on. You could still spin them freely by hand. I thought the noki wasn’t talking to them but actually I believe the reel stepper driver was bad and was causing the noki error. After replacing the 2 reels the machine plays like a champ!!
John
Slotman:
--- Quote from: scottf11961 on March 17, 2023, 03:17:38 PM ---Have you solved the mystery? Ive had that communication error for a while now on my shinning 7s. To the point where ive given up. Behind the reels, there are 2 boards. On the right is a body board. On the left is the NOK board. Each board has its own USB cable. The error is coming from the left board. Thats as far as i got. Finding parts will not be fun
--- End quote ---
I have shelves full of Aruze parts if you ever need any.
Navigation
[0] Message Index
[*] Previous page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |