New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT Fortune 1 Sircoma/Poker => Topic started by: Dbcooper on August 09, 2019, 01:25:40 AM

Title: Component identification
Post by: Dbcooper on August 09, 2019, 01:25:40 AM

Hello,
Can anyone help me with the values of the resistor and two diodes I’ve circled on these photos? Thanks in advance.

Title: Re: Component identification
Post by: shortrackskater on August 10, 2019, 09:19:23 AM

I'll check my F1 board when I get home, if Alan doesn't beat me to it!  :propeller:

Title: Re: Component identification
Post by: Badbaud on August 10, 2019, 08:13:17 PM

47 Ohm 3 Watt, I usually install a metal film upgrade, not carbon film.
Mount it vertical for more heat dissipation, it tends to heat up and weaken or open nearby traces when laying on the board.

Title: Re: Component identification
Post by: Dbcooper on August 11, 2019, 03:12:42 PM

Great...thanks for your help!

Title: Re: Component identification
Post by: shortrackskater on August 11, 2019, 03:29:30 PM

Do you still need the diode ID's?

Title: Re: Component identification
Post by: Badbaud on August 11, 2019, 07:41:30 PM

Diodes are 1N4001, or 4002, or 4003, or 4004, or 4005, or 4006, or 4007.

Title: Re: Component identification
Post by: Dbcooper on August 28, 2019, 11:55:23 AM

Thanks for the diode identification too!

Title: Re: Component identification
Post by: RiseLikeRa on September 02, 2019, 08:08:21 PM

Glad to see that this Fortune 1 forum is still alive and kicking.


I am on the hunt for 1 more fortune 1, Silver Jubilee.  The North East is a coin op black hole.   :no:   I will keep looking and perhaps visit with my friend out west again.


Ra