**Video Poker, Keno, Slots, 21** Gaming machines > IGT Fortune 1 Sircoma/Poker |
Sircoma SG-103 Board Corrosion |
(1/1) |
Quiglag:
I was given a Sircoma sg-103 Draw Poker Machine and it is in pretty good condition other then some corrosion on one of the three Bally Computer Cards. Card #1 (400715) has a NiCad battery that corroded and did some damage to the traces. I don't think I would be able to find a replacement board seeing as I can hardly find any information on the machine itself. What would be the best way to clean the traces? And once clean would I be able to jump the damaged traces with small wire? Thanks |
RiseLikeRa:
Dont be so sure that you will not find that board. Although the Fortune 1 parts are rare they are still out there. Post a classified ad if you are a contributing member. I dont think that I have an extra board but I may know someone who might have one. PM me if you have not luck with the classified ad. Ra |
Quiglag:
Thanks, but I don't even think my machine is technically a Fortune 1. I believe what I have pre-dates the Fortune 1. I am not sure how similar the two machines are. |
Trusseth:
Hi! I have the same sigcoma sg103 as in the picture. I have it working except some switch lights and I haven’t seen the light/bell fire off yet. Manufactured boards Dec 1979! That is super old! Almost as old as me! Did you ever get ahold of a manual? Tony |
Chris-socal:
Just noticed thie original post was from 2015. Not a lot of documentation on these. Nothing in the file system? If you go to IGT, there is a sub category for Sircoma near the bottom. There are a few manuals that have schematics. Chris |
Navigation |
Message Index |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |