New Life Games LLC
NLG Classified ads and White Sheet => NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! => Topic started by: NorCal Slots on June 08, 2023, 01:07:54 PM
-
Hi There,
I have MEI Cashflow sc6602u Bill Validator Completes for IGT S2000, GameKing iGame & SAVP/G20/G23/S3000/Crystal for sale tested, flashed for IGT Netplex or IGT USB Firmware
If you have a IGT with those old and slow all metal WBA bill validators you need to check out the Mei Cashflows as a huge boost to TITO ticket and 4 way bill acceptance. It’s casino fast!
Swapping out the old bill validator with these takes about 5 minutes with a few screws and plugging in 3 connectors followed by opening and closing the door.
No Key/Clear chips required. Message me if you would like 1.
$225 *Free Shipping*
Includes:
Tested Sc6602u or sc6612u (upstacker for G23/G20) Bill Validator Head
Chassis
IGT Wire Harness
Tested Interface Card (Single Switch for IGT)
Tested 500/600 note Cashbox
S2000, Game King or G20/Crystal Bezel
Thanks,
-Joe
-
How much?
-
Updated above
-
Reduced price and have many more still available
Thanks :)
-
I only need the Front part where the money goes in, SC6602u. I don't need the metal frame the head goes in.
What would the cost be?
I also have 2 of the SC6602U that needs to be reflashed?
Could those be updated or is it less expensive to purchase the Sc6602u from you?.
THX.
-
Forgot,
I don't need the Cash Box.
May purchase 2 if I'm able.
-
Yes PM sent
-
Received my MEI,s
They look Brand New & take all currency. New or old.
Thank You
-
You’re welcome! Still have plenty more to get rid of :-)
-
I need to make a correction.
My MEI Bill Validate & Interface Card is working.
I have the Blue Ambulance Flashing.
Thanks
-
Richard as you confirmed the MEI IO cards you had were fine as you swapped the card to the working cabinet and all was well…
The root cause of your issue was you had maximum credits allowed on the machine from a prior jackpot so the Bill Validator / machine was not accepting anymore credits. Once you cashed out the BV began to accept bills and tickets again!
Glad the 3 heads I sent are working well! Cheers!
-
bump
-
Still have more
-
Bump always have more :)
-
How much are they for each head?
-
How much are they for each head?
BV Heads only I am currently priced at $50 includes flash, test and shipping (within the US)
-
Is this kit still available?
I have a s2000 with UBA and want to switch to MEI so pretty much I need everything, is it possible to have this kit with the SCN66 MEI advance ??
-
Yes I have a few with SCN66 advanced I’ll send you a pm
-
Do you have any more MEI SC-6602U heads available?
I have an S3000 with an SC-6612U (Upstacker). I just want to swap out the head and install the correct one, SC6602U (USB).
-
Yes pm sent with my contact details
agree all the S3000s I have worked on do not have upstacker setups I have both 6612u and 6602u and the appropriate USB firmware to flash
-
Do you still have these complete kits available for an S2000?
What is the reduced price?
-
Yes details are accurate at the top of the thread / post pm me if you need one so we can discuss what firmware to flash it for (I.e. IGT S2000 or G23/S3000)
-
I'll take 4 more. Soot me a text. I ordered 10 not that long ago and you said you had to find a big enough box, but never heard back from you.
-
Sent you a PM
-
I'm interested in one for an igt I game. That should be the same as an s2000. Is that right.
Message me with the cost.
Thanks
Ken
-
Yes pm sent with my contact details
agree all the S3000s I have worked on do not have upstacker setups I have both 6612u and 6602u and the appropriate USB firmware to flash
Sent you a PM about these BVs
-
Stilll available if anyone needs Mei completes for any IGT
-
Will these work in an IGT Trimline?
-
Yes of course!
-
I have a game king with a Bill collector that won't accept any bills.
The model number is WBA-13-SS
Do you where I can purchase one of these?
Ron G.
-
Ron these replace the older WBA bv are much faster / newer/ better
-
Hello,
Thanks for your quick reply.
So the bill validators that you mentioned would be a replacement for the broken one that I currently have?
If so, do you know where I can purchase one of these models?
Also, if I go ahead and get one of these bill validators that you mentioned, will I need to make any software changes to my Game King machine?
Ron G
-
Yes I have them for sale as I specialize in these models exactly for your cabinet. I’ll send a pm and we can review it’s pretty straight forward swap no software or key chips required.
Reuse the 3 screws and 3 same plugs.
-
I would be interested in one for an S2000 if still available.
Thanks,
John
-
Yes I’ll send a pm now with contact info