New Life Games LLC

General NLG Chat => Show off your Home Game Room => Topic started by: Ken on October 11, 2020, 06:06:19 PM

Title: Got the machines at least running.
Post by: Ken on October 11, 2020, 06:06:19 PM

I'm actually going to have a game room since I don't have the shop anymore. Since Delta has been dumping rain on us since Friday afternoon I was able to get these machines operational. They are still dirty but at least running. Got the S2000s set up with TITO@Home V2 boards. I have a Game King that I need to get up and running but I need to find my Key 28. I found my Tabasco glass but still need to find the reel strips and software. Then the Black Jack is gone.

If anyone has the TITO@Home V2 (even V1 probably) with the connections to the machine on a BB2 and Alpha would be appreciated. I only have IGT harnesses to use so I will need help figuring out the connections.

If there is any instructions for the machine programming sequence for the BB2 and Alpha would be nice too.

Thanks,
Ken

Title: Re: Got the machines at least running.
Post by: rickhunter on October 11, 2020, 06:45:31 PM

Ken there are videos on youtube with the TITO programming for bb2 and alpha (they are nearly identical).  You can look at Bettorslot's channel for them or my channel.

Title: Re: Got the machines at least running.
Post by: Ken on October 11, 2020, 06:47:12 PM

Thanks Rick. I will check it out.

Title: Re: Got the machines at least running.
Post by: Tilt on October 11, 2020, 06:50:18 PM

Looking nice Ken!  I can't help with the BB2 wiring or settings, but if you can't find your Key 28 let me know and I'll send you one.  or even better a 039 bootchip which lets you bypass start up checks.  Machine boots in seconds rather than minutes with it and it has a built in keychip as well.

Title: Re: Got the machines at least running.
Post by: Ken on October 11, 2020, 07:07:05 PM

Thanks Cliff!. If I don't get my equipment set up I just might take you up on that.

Title: Re: Got the machines at least running.
Post by: RB on October 11, 2020, 07:21:03 PM

Quote from: Tilt on October 11, 2020, 06:50:18 PM

Looking nice Ken!  I can't help with the BB2 wiring or settings, but if you can't find your Key 28 let me know and I'll send you one.  or even better a 039 bootchip which lets you bypass start up checks.  Machine boots in seconds rather than minutes with it and it has a built in keychip as well.

 :I_agree_1:

Put it in and leave it. Never have to remove it to clear or key the machine.

Title: Re: Got the machines at least running.
Post by: Ken on October 11, 2020, 08:59:46 PM

Got the alpha on TITO. Thanks

Title: Re: Got the machines at least running.
Post by: Ken on October 14, 2020, 05:28:57 AM

Sad news. My WMS touch screen didn't come on last night.

Title: Re: Got the machines at least running.
Post by: Stayouttadabunker on October 14, 2020, 09:39:15 PM

Quote from: Ken on October 11, 2020, 06:06:19 PM

If anyone has the TITO@Home V2 (even V1 probably) with the connections to the machine on a BB2 and Alpha would be appreciated. I only have IGT harnesses to use so I will need help figuring out the connections.

I can't remember why I have this on a post-it note? haha
Click on photo to enlarge if needed...>>>

Title: Re: Got the machines at least running.
Post by: Ken on October 15, 2020, 03:23:23 AM

Thanks Mark. That project is on hold until I work on the monitor.