New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Tater on January 30, 2024, 06:25:46 PM

Title: Printer Bracket for Right of Reels
Post by: Tater on January 30, 2024, 06:25:46 PM

Can someone please post a picture of the bracket used to install a WBA Printer on the right hand side of the Reels in a S2000.

Thanks :Please_Post_Pictures_2clr:

Title: Re: Printer Bracket for Right of Reels
Post by: Stayouttadabunker on January 30, 2024, 08:06:40 PM

Here you go

Click on any photo below to enlarge if needed...>>>

Title: Re: Printer Bracket for Right of Reels
Post by: Jim on January 31, 2024, 07:39:55 AM

you post a picture of what you have and we can tell you what you need!,  in addition to the the reel shelf, there is a surround metal housing, and a flat plate that mounts onto the printer itself, a slot in the back of the metal work, that the plate is inserted and secured with two screws in the front.

Hope this helps

I have all the parts available.

Jim

Title: Re: Printer Bracket for Right of Reels
Post by: Tater on January 31, 2024, 03:41:04 PM

Bunker, Thanks

Jim, Thanks

I have printers in my other machines, but all in the top cabinet.  I have the Printer, and slide.  I think I have the correct bracket from your pics, I have attached a couple of pics of mine below.  I am still missing a Harness.

PS Jim, I sent you a PM on the 21st RE the Tabasco kit and didn't hear back, I will call you in a bit so we can talk.

Ron

Title: Re: Printer Bracket for Right of Reels
Post by: Jim on January 31, 2024, 06:27:25 PM

lookes like you have everything, just install the metal housing to the side wall, connect the plate on the bottom of the printer, install it, then plug it in. there should be a printer connector in the wiring behind the reels.  what harness are you missing?
Jim

Title: Re: Printer Bracket for Right of Reels
Post by: Tater on February 07, 2024, 02:19:27 PM

der Franken Maschine is one step closer to being whole again.

Printer Bracket, and Printer successfully installed.

Just want to make sure I have the correct connector, pic attached below.

Jim, sorry, was thinking of next step (harness for Bill Acceptor) new post to come.

Thanks again guys.   :thank_you:

Title: Re: Printer Bracket for Right of Reels
Post by: RB on February 13, 2024, 10:30:51 AM

Looks correct.