Progressive Controllers and Displays > Mikohn Progressive Systems

Does somebody have manual for mikohn Cham 2+

(1/1)

qbert:

--- Quote from: Kellyat1111 on August 11, 2012, 07:28:37 AM --- :59-I really am con fused I think a manual will help  :103-

--- End quote ---

--- Quote from: Mr. Dinoman on August 11, 2012, 08:05:05 AM ---Hopefully this will help...
Jimmy

--- End quote ---

--- Quote from: uniman on August 11, 2012, 08:43:12 AM ---Don't be afraid to ask questions, the programming of a Cham2+ can be a real pain sometimes!
Here's a lesson I learned on my Cham2+; If your downloading a text message to be displayed on the meter, download immediately after the Cham2+ boots up and your success rate will greatly improve!

--- End quote ---

--- Quote from: Kellyat1111 on August 11, 2012, 09:11:33 AM ---I just realized on the mother board the cable I have going from mikohn cham2+ will not fit in the board where it says progressive :52- :103-

--- End quote ---

--- Quote from: Foster on August 12, 2012, 12:14:04 AM ---FYI The S2000 actually has 2 progressive ports
One on the motherboard and one on the Comm board that is the board in the middle of the AC Dist box mounted on the back wall with a ribbon cable between it and the motherboard
Both Progressive ports work the same way and are the same style connector, a 6 pin Molex SL 0.100" connecter
The S+ and S2000 both use the J7 connector on the Cham II+ a 14 pin version of the ATA (PATA) Connector on Computer Motherboards, it also has 0.100" spacing
Please post a clear picture of the harness and try to a good close up of the connectors when doing it.

--- End quote ---

--- Quote from: Kellyat1111 on August 12, 2012, 02:59:57 AM ---Hey thank you so much for the info do you know where I can purchase the cable

--- End quote ---

--- Quote from: Foster on August 12, 2012, 04:44:14 AM ---MAny of us that have a S2000 and a Cham II+ made our own cables.

--- End quote ---

Navigation

[0] Message Index