**Video Poker, Keno, Slots, 21** Gaming machines > IGT I-Game and Game King
No video when changing a Game King from an 3902 to a 044.
Yoeddy1:
Make sure your clear chip and/or boot chip are not in backwards. I did this yesterday when trying to clear and had all lights on the MPU with a blinking red. No video either. Check cable connections to the motherboard as well.
Mine do NOT have the Varta batteries.
Thanks,
Jason
bpracer:
Chips are in correctly.
--- Quote from: Yoeddy1 on September 28, 2015, 06:41:29 AM ---Make sure your clear chip and/or boot chip are not in backwards. I did this yesterday when trying to clear and had all lights on the MPU with a blinking red. No video either. Check cable connections to the motherboard as well.
Mine do NOT have the Varta batteries.
Thanks,
Jason
--- End quote ---
bpracer:
--- Quote from: caffey on September 28, 2015, 05:15:57 AM ---If you have a LCD Ceronix monitor this was my
fix when I switched from 3902 to 044 board
and no video. It may work for other monitors as well.
John
Mod Note: Dead link removed
--- End quote ---
John, I can't find your post and I can't access your link.
Please post or email the details.
Thanks
rickhunter:
Did you test the green battery to see if you have good voltage?
caffey:
Bpracer sent you an email with a screen shot.
Which I tried but could not post here.
The file was sent to me by Ceronix.
John
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |