New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Slots4me on April 18, 2022, 04:45:36 PM
-
I had a working wba 12 rs-232 for my bally
Switched heads to see if a head worked now transporter will not cycle & validator device error
Put working head back in for all testing..
Led on board red so getting power..
Dip switch 1238 led blink
Will not cycle in test mode..
Will a rs-232 kill a transporter?
If I put in another wba12 it cycle and clears validator errors as soon as plugged in
I have cleared system multiple times to see if it helps...
Kinda stumped on this one
-
Any idea to fix?
Or put it to rest?
-
NO REPLY YET
DOES ANYONE HAVE ANY IDEAS?
-
If it worked before the head swap...
Does a Bally have a bv power supply? Maybe it died?
Maybe you damaged a wire/connection? Seems not likely but worth looking.
I don't think a RS232 communication head in the wrong machine would cause a big problem, but I don't know what comm bally uses for bv right off hand.
Maybe something in wiring/connections was barely working and you made that worse?
BV door switch problem, maybe?
After clear - is bv enabled?
Just a few things off the top of head.
-
I have tried in other machines
Transporter worked great..
Have used different plugs & heads
Worked great
Now has power but will not take bill
Light on bevel will not light up
I'm stumped on this one...