New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: slotdoofus on July 07, 2016, 12:39:54 PM
-
I'm working on a S2000 machine.
When I fire it up, the bill validator doesn't cycle. I get an error:
Bill validator no download
What does this mean? Is my bill validator dead? If I have to buy another one, do I just need to purchase the transport, or the entire assembly?
I swapped it out w/ another bill validator and the machine runs fine.
-
It means there is a software error. Have it reflashed or replace the chip if it happens to have an eprom. You did indicate WBA12 which is a flash unit, 13 is eprom based.
-
So.....
I just need to send it to someone to have it re-programmed?
-
Most likely so.
-
Not sure if RB does software reprogramming on bill validators, if not here is an example of a place that does, read at the bottom of their webpage. They also sell WBA units.
http://www.ohiogaming.com/wba.htm (http://www.ohiogaming.com/wba.htm)
-
I do not. I could only provide a chip for eprom models. Ken at Ohio Gaming is a good guy. Great recommendation!
-
Thanks guys...