New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: GOS on September 21, 2016, 10:04:46 AM
-
I have an IGT S+ with no BV - have several WBA 12/13 setups but the harness in cabinet seems to be missing - here is the connector I am trying to find harness for.
-
Do you need the harness that connects to what is pictured, or do you need what is pictured?
-
I have the harness pictured - I need what attaches to it.
-
It is part of the power supply that is used for the WBA's. The Power supply has a 3 row molex that connects to an existing plug that goes to the backplane, and then there are a pair of the single row molex plugs that plug to your harness leading out the back of the WBA cage (only 2 are used)
Power supply photo shamelessly lifted from Rudy's Deals website. Credit goes to them. :hail:
-
we that makes sense - I need the power supply - i have the other style power supply. so I will change the topic - thank you
-
Barry, make sure the connector matches the WBA units, there are two types, WBA 10/11 have the open contacts mounted on the side of the connector, the WBA 12/13 use a standard pin connector.
I have those power supplies, re-capped with a new PW chip and tested.
Let me know.
Jim
-
I have both types of wba 10/11 11/12 - I assume you are referring to the wiring harness that I pictured. Are you saying there are 2 different power supplies for the wba depending on the model of transport?
-
Barry, no, same supply for both units.
Jim