New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Painkiller2017 on July 10, 2017, 01:05:18 AM
-
Hello Gys i am from Austria an have a Problem with max Bally Reel Machine !! The First Error was 81 i change the Batterie and as next Cole the error 83F cam You help me please??
If i Must make a RAM Clear does have anybody a Setup ?? Greetings
-
You will need to preform a Safe RAM Clear (http://newlifegames.com/nlg/index.php?topic=208.msg616#msg616)after the battery change.
-
Hello and how i can do. that ?? Mit freundlichen Grüßen
-
Can i do. that if i have no Clear Eproms ??
What Eproms Are the right for my Board ?
I have try it only with the DIP DS1 Sw8 it no Workshop
-
This is my Board
-
Make a post in the classifieds "Wanted To Buy" and someone can help you with a set of clear chips.
-
[color=rgba(0, 0, 0, 0.541176)][/color]
hi Guys
I have already read everything there is to the error 83 F and also tried every kind of clear he shows me always synonymous with the right sign but if I give the Bases again I always get this 83F error I am despairing I have accurate Photos made from my board and also from all dip swiches and the pins maybe you discovered an error ??
-
You need to purchase a set of S6000 clear chips U28 & U43. Turn power off. Pull out the U28 & U43 Main chips. Install the clear chips into the U28 & U43 sockets. Now you will do the clear procedure. With power off. Hold down both the TEST & PSEUDO buttons on the MPU. Keeping holding the buttons. Now turn ON the power while still holding down the two buttons. Hold the buttons down till the SPIN, MAX BET, and other deck buttons light up on the outside of the door, start flashing. Now you can let go of the TEST & PSEUDO buttons on the MPU. Turn off the power. Take out the clear chips and reinstall the MAINS. Install the MPU , keep the door open and turn the power on. The reels will go through a calibration spin and dance and then stop moving. With the door still open after the reels calibration is completed, the LED display will be flashing numbers. On the outside of the door on the button deck, Press the furthest button to the left , the SERVICE/CHANGE button once. Close the door and you are good to go.