New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Painkiller2017 on August 02, 2017, 02:44:51 AM
-
I have a Problem i make a RAM Clear After Batterie change it Show the right Report After Clear but if i change the Eproms and Turn the Slot on it brings error 83 F what can i do ?? Please Help me
-
This is a common problem on some Bally machines after doing a battery replacement. Error code 83F or 83F0 indicates the SafeRam was not cleared completely or correctly, the machine is unhappy with something about the SafeRam. On powerup the Mains chips check the SafeRam and give this error if there is something amiss. It may be that the Clear chips you used are not compatible with or new enough for your Mains chips. Or that one of the battery related jumpers on the board is in the wrong position. Or that you didn't keep holding in the pushbuttons long enough after the Clear, reported to need 30-45 seconds on some machines. And if the number on your Mains chips is "95000" you don't need to use Clear chips, can use a jumper on the board to Clear SafeRam.
Look in the upper right area of this web page and find the "Search" feature. Type in "83F", select "Entire Forum" in the next block and click on "Search". Several discussion threads will come up for you to read about this problem. Here are a couple of them:
http://newlifegames.com/nlg/index.php?topic=11985.msg64716#msg64716 (http://newlifegames.com/nlg/index.php?topic=11985.msg64716#msg64716)
http://newlifegames.com/nlg/index.php?topic=6538.msg76839#msg76839 (http://newlifegames.com/nlg/index.php?topic=6538.msg76839#msg76839)
.
.
.
(click to enlarge)
(https://s1.postimg.org/84cm8kn67/search_nlg_z1.jpg)
-
Can You say me where Are the jumper for the Batterie or for door and Save ?? Greetings
-
Here is the battery jumper/disconnect. JW12. The pins need to be jumpered/connected together.