New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT PE and PE Plus Poker Games => Topic started by: Nepa Coin Op on November 06, 2017, 12:57:27 PM
-
I picked one of these up that has some software issues ..... I'm not at the machine right now but when I am a little later I can give chip info on what is in it .....but here's the issue... with the chips that were in it that do say multi poker on the labels, it's giving corrupt graphics of what looks like a fruit machine not poker .... there was an extra chip not labeled in there loose I swapped with the game chip and ended up with a working video slot .... works but, cash out, and bet buttons don't work, only plays with max bet button ..... what chips should this machine have to be the multi poker that it was ??
Thanks
-
Please provide as much info about the current chip set in the machine as possible as Video Slots where NOT documented very well. As far as multi poker chipsets go, check this post towards the middle to the bottom: http://newlifegames.com/nlg/index.php?topic=10064.0 (http://newlifegames.com/nlg/index.php?topic=10064.0)
I'd like to find out what video slot it is. If you can post pics of the MPU board and cycle through the reset key menu and post the a pic that looks like this:
-
Chips I had it in originally were in it that were giving corrupt what looked like slot graphics were obviously burnt aftermarket based on the labels, but here is what they read
In the program u67 spot was a chip labeled "igt pe multi gm xmp00006 progm"
In u66 was the chip labeled "multi poker igt data"
Like I said I had a loose prog chip laying in the machine when I swapped the other with the loose one labeled "prog" that gave me video slot
U77-u80 are chips labeled cg1151 which appear original
Actually with the burnt "poker" chips in it it plays as a poker but with jumbled up garbage slot graphics ..... so what ever chip hold the images must be wrong
Looks like the cg chips are wrong
-
If you can reproduce the picture I show by turning the Jackpot Reset key until that page shows (with the video slot in the program socket) that would be awesome. Also a picture the MPU (PCB board) with a clear shot of the CG roms and maybe include the color CAP / CAPX rom chip as well.
I have a full chipset to get your machine working as a Multi-poker that I would trade even up for the video slot chips. But I would like the above requested info, thanks.
BrianT