New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Bluezl1 on January 21, 2020, 05:56:02 PM

Title: Help!
Post by: Bluezl1 on January 21, 2020, 05:56:02 PM

I just received a git s2000 multi denomination 5 reel machine
When I plug it in the lights come on and the screen says display checked
And the bill acceptor keeps making a noise and the yellow lights are on and the red lights blink with a click noise any ideas what it needs to repair?

Title: Re: Help!
Post by: Stayouttadabunker on January 21, 2020, 07:11:10 PM

Where are the "red lights"?

Title: Re: Help!
Post by: Bluezl1 on January 21, 2020, 07:19:57 PM

When you open the bottom door where the metal holder for the board is .the front there is lights on front

Title: Re: Help!
Post by: Stayouttadabunker on January 21, 2020, 07:40:57 PM

Red light on the MPU means something's wrong with the chips...should only be green or amber.

Turn off power, pull out board and inspect chips that go into sockets.
Take a good photo of all the chips onboard (Keep under 1000Kb)
and attach to your next Reply utilizing "Attachments and other options"

Title: Re: Help!
Post by: Bluezl1 on January 21, 2020, 08:06:54 PM

I just looked at the lights  and the top 2 yellow lights and the very bottom red light blinks and makes a click noise when it blinks

Title: Re: Help!
Post by: Stayouttadabunker on January 21, 2020, 09:02:26 PM

Quote from: Bluezl1 on January 21, 2020, 08:06:54 PM

I just looked at the lights  and the top 2 yellow lights and the very bottom red light blinks and makes a click noise when it blinks

Yep...something's wrong with your chips for sure.

Could be just a minor thing like a folded under chip leg or wrong orientation.

A picture is worth a thousand words.
We have trained eyes that could tell you more about your MPU.

Check your battery voltage with a mutimeter too...give us the voltage in dc left in it.

Title: Re: Help!
Post by: Bluezl1 on January 22, 2020, 05:29:55 AM

Thanks for responding here are the pictures

Title: Re: Help!
Post by: Stayouttadabunker on January 22, 2020, 09:48:59 AM

You need to send that board in for someone to look at and test.
The base chip in U21 is a copy and I have no idea what the Version chip in U44 is although it does have a commission tape on them.
Are you able to desolder/remove the battery to check voltage?
If not, you need to get the MPU & software checked out.

Have you seen this machine work before?

Title: Re: Help!
Post by: Bluezl1 on January 22, 2020, 07:37:28 PM

I pulled board out and pressed on all chips and put back in and it went through the checking memory and spun the reels 1 time and now it says
Door open m and main battery low

Title: Re: Help!
Post by: Stayouttadabunker on January 22, 2020, 07:41:01 PM

You answered not one of my questions sir.

I am trying to help you.

I would suggest that you change the battery.